美版音波 PRIME 完整指南:原理、效果、探頭差異與適合對象

隨著年齡增長,臉部開始出現輪廓線條不明顯、雙下巴、嘴邊肉及皮膚鬆弛等問題,不少人會開始考慮透過音波拉提改善。

而近年受到關注的 美版音波 PRIME(Ultherapy PRIME),究竟與傳統美版音波有什麼不同?適合哪些人?施打後又需要多久才能看見效果?

這篇文章將帶你了解美版音波 PRIME 的技術原理、不同深度探頭的作用,以及 MILAC.C Clinic 如何透過個人化評估規劃音波拉提療程。

美版音波 PRIME,又稱 Ultherapy PRIME,是利用微聚焦超音波(Microfocused Ultrasound)進行非侵入式皮膚拉提的醫療設備。

透過將超音波能量聚焦於皮膚特定深度,形成微小的熱凝結點,刺激組織修復與膠原蛋白重塑,逐步改善皮膚鬆弛與輪廓線條。

與一般保養療程不同,美版音波 PRIME 能依照不同探頭深度,針對真皮層及較深層的支撐組織進行治療。

常見的評估需求包括:

  • 下顎線輪廓不明顯
  • 臉部及下巴下方皮膚鬆弛
  • 眉部與眼周鬆弛
  • 頸部皮膚鬆弛
  • 希望改善部分細紋與皮膚彈性

美版音波 PRIME 不需要手術切口,但實際改善程度仍取決於個人的皮膚狀況、鬆弛程度及治療規劃。

1. DeepSEE™ 即時超音波影像技術

美版音波 PRIME 的重要特色之一,是配備 DeepSEE™ 即時超音波影像系統。

醫師能在治療過程中,透過超音波影像觀察皮膚組織結構及不同深度的位置,協助確認能量施打的目標層次。

這代表醫師不需要單純依靠外觀與經驗推測皮膚深度,而是能結合即時影像資訊進行判斷。

不過,即時影像並不代表治療完全沒有風險,仍需要由熟悉設備操作與臉部解剖結構的醫師進行評估及施作。

2. 三種深度探頭,針對不同皮膚層次

美版音波 PRIME 配備不同深度的探頭,常見包括 1.5mm、3.0mm 及 4.5mm。

每一種探頭的治療深度不同,並不是所有人都需要使用全部探頭。

醫師會依照皮膚厚度、臉部脂肪分布、鬆弛程度及治療部位,評估適合的探頭與施打方式。

3. 非侵入式療程,逐步改善輪廓

美版音波 PRIME 透過聚焦超音波能量作用於目標組織,促進後續的膠原蛋白重塑。

部分人在治療後可能感受到初步的緊實變化,但較明顯的改善通常需要數週至數個月逐漸呈現。

由於每個人的皮膚老化程度及組織反應不同,實際效果與維持時間也會有所差異。

選擇音波拉提時,很多人只注意施打發數,卻忽略了另一個重要因素:探頭深度是否適合自己的皮膚結構。

1.5mm 探頭主要作用於較淺層的真皮組織。

在適當評估下,可用於部分細紋及淺層皮膚鬆弛問題,例如眼周或口周的特定治療區域。

主要評估需求:

  • 眼周細紋與鬆弛
  • 口周細紋
  • 較淺層皮膚緊實需求

眼周皮膚較薄,施打範圍及方式需要特別注意,並非所有眼周部位都適合治療。

3.0mm 探頭可將超音波能量作用於較深的組織層次,協助改善皮膚鬆弛及支撐力下降的問題。

主要評估需求:

  • 臉部皮膚鬆弛
  • 局部輪廓線條不明顯
  • 希望改善皮膚緊實度

實際作用層次會因皮膚厚度及治療位置而有所不同。

4.5mm 探頭主要用於較深層的治療,可針對包括 SMAS 筋膜層附近的支撐組織進行能量作用。

SMAS 是臉部重要的支撐結構之一,也是音波拉提經常討論的治療目標。

主要評估需求:

  • 下顎線鬆弛
  • 下巴下方輪廓不明顯
  • 臉部較深層的拉提需求

需要特別注意的是,4.5mm 並不代表一定適合所有臉型。對於臉部脂肪較少、組織較薄的人,更需要謹慎評估施打位置與深度。

重點是:探頭不是越深越好,發數也不是越多越有效。適合自己的治療層次與能量規劃,才是音波拉提的重要考量。

如果你有以下困擾,可以考慮先諮詢醫師,了解自己是否適合美版音波 PRIME:

  • 開始感覺下顎線不如以前清晰
  • 臉部出現輕度至中度鬆弛
  • 想改善下巴下方或頸部鬆弛
  • 希望改善眉部或部分皮膚細紋
  • 不希望接受手術式拉提
  • 想了解非侵入式的皮膚緊實療程

但如果本身臉頰脂肪較少、已有明顯凹陷,或存在其他特殊皮膚與健康狀況,則需要先由醫師評估。

並不是每一種嘴邊肉、法令紋或臉部下垂,都能單靠音波拉提改善。

在 MILAC.C Clinic,我們認為音波拉提不只是選擇一台設備,更重要的是了解每個人的臉部結構與實際需求。

01|即時影像輔助,確認目標治療層次

MILAC.C 使用美版音波 PRIME 的 DeepSEE™ 超音波影像技術,讓醫師在施作過程中觀察皮膚組織與治療深度。

透過影像資訊配合醫師的專業判斷,協助規劃不同部位的施打方式。

02|依照臉部結構進行個人化評估

每個人的臉型、脂肪分布及皮膚厚度都不同。

有些人需要加強下顎線的輪廓,有些人則更在意眼周或頸部的鬆弛。

MILAC.C 重視施作前的個別評估,依照不同部位的皮膚狀況,規劃探頭深度、治療範圍及能量設定。

尤其對於擔心臉頰凹陷的人,醫師會評估臉部脂肪與支撐結構,避免不必要的治療。

03|重視臉部整體比例與拉提方向

臉部並不是平面的。

不同區域的組織厚度、鬆弛方向與支撐結構都可能不同,因此治療時不應只考慮單一部位。

MILAC.C 會結合臉部輪廓及個人需求,評估適合的施打區域與方向,希望在改善鬆弛的同時,保留自然的臉部比例。

04|原廠設備與探頭資訊透明

MILAC.C 重視設備與耗材來源的透明度,使用 Ultherapy PRIME 設備及相應原廠探頭,並提供相關正品認證資訊供顧客了解。

在接受療程前,也可以主動向診所確認設備、探頭及治療內容。

05|由朴智英代表院長進行個別評估

MILAC.C 位於韓國首爾漢南洞生活圈附近,由朴智英代表院長提供個人化醫美諮詢及療程規劃。

診所設有中文翻譯服務,讓來自台灣及其他海外地區的顧客,也能清楚了解療程內容、預期效果及術後注意事項。

兩者皆使用微聚焦超音波技術,透過聚焦能量刺激組織修復與膠原蛋白重塑。

Ultherapy PRIME 是更新一代的平台,針對設備介面、影像呈現及操作體驗進行升級。

不過,設備升級不代表每個人都一定能得到更明顯的效果,醫師的評估、施打技術及個人條件同樣重要。

部分人在治療後可能感覺皮膚較緊實,但膠原蛋白重塑需要時間。

一般會在治療後數週至約 2~3 個月逐漸觀察到變化,部分人的改善可能持續更久才逐步呈現。

實際效果因人而異,不能保證每個人都會在相同時間看到明顯變化。

這是許多人在考慮音波拉提時最擔心的問題之一。

音波能量可能影響目標區域及鄰近組織,因此對於臉部脂肪較少、皮膚較薄,或已經存在凹陷問題的人,需要特別注意治療深度、位置與能量設定。

DeepSEE 即時影像可以輔助醫師判斷組織層次,但不能完全排除凹陷或其他不良反應的可能性。

建議在治療前,先讓醫師評估臉部脂肪分布及實際鬆弛原因。

施打時可能感受到熱感、刺痛、痠脹或較深層的短暫不適,疼痛程度會因個人體質、施打部位及能量設定而不同。

治療前可以先與醫師討論疼痛管理方式。

美版音波 PRIME 的維持時間會受到年齡、皮膚狀態、生活習慣及個人組織反應影響。

部分人可維持約一年或更久的改善,但並非所有人都能達到相同效果,也不能阻止皮膚持續自然老化。

是否需要再次治療,應由醫師根據後續皮膚狀況評估。

美版音波 PRIME 使用聚焦超音波,將能量作用於特定深度的組織,主要用於改善皮膚鬆弛與拉提需求。

鳳凰電波 Thermage FLX 則使用單極射頻技術,透過組織加熱促進膠原蛋白重塑,主要用於皮膚緊實及皺紋改善。

兩種療程的能量形式與作用方式不同,沒有絕對哪一種比較好,應根據實際需求選擇。

美版音波 PRIME 通常不需要長時間恢復,但治療後可能出現暫時性泛紅、腫脹、壓痛、瘀青或局部敏感。

少數情況可能發生較嚴重或持續的不良反應,包括神經相關症狀或組織損傷。

如有持續疼痛、異常麻木、肌肉無力或其他不適,應及時聯絡診所並接受醫療評估。

歡迎透過官方 LINE 預約諮詢,了解適合自己的美版音波 PRIME 療程。

What is South Korea’s Sofwave? Its working principle, effects, and ideal users | MILAC.C

了解韓國 Sofwave 索夫波音波拉提的 SUPERB™ 技術、1.5mm 真皮層作用原理、細紋與緊緻改善方向,以及適合對象。MILAC.C 提供個人化醫師評估。

Sofwave 索夫波是什麼?認識新一代超音波緊緻拉提療程

隨著年齡增長,皮膚中的膠原蛋白與彈力纖維逐漸流失,可能出現細紋、肌膚鬆弛及彈性下降等問題。

除了常見的美版音波拉提,近年韓國醫美市場也開始關注 Sofwave 索夫波,一種以真皮層為主要治療目標的非侵入式超音波緊緻療程。

Sofwave 與傳統聚焦式音波拉提的主要差異,在於超音波能量的傳遞方式與作用深度,為希望改善細紋及肌膚緊緻度的人提供另一種選擇。

什麼是 Sofwave 索夫波?

Sofwave 索夫波是一種運用 SUPERB™(Synchronous Ultrasound Parallel Beam,同步超音波平行束)技術的非侵入式超音波緊緻設備。

與部分以較深層組織為目標的音波拉提技術不同,Sofwave 主要將超音波能量作用於皮膚表面下約 1.5mm 的中層真皮區域。

透過受控的熱能刺激,促進皮膚膠原蛋白重塑,協助改善細紋、皮膚鬆弛及彈性下降等老化問題。

Sofwave 的特色並不是追求越深層的能量作用,而是針對與皮膚緊緻度密切相關的真皮層進行治療。

Sofwave 索夫波的三大技術特色

1. SUPERB™ 同步超音波平行束技術

Sofwave 採用 SUPERB™ 技術,透過七個圓柱形超音波能量區域,將熱能傳遞至預定的真皮層深度。

其設計著重於在一定治療範圍內形成均勻分布的熱作用區域,刺激膠原蛋白重塑,改善肌膚緊緻度。

2. Depth of action in the middle dermis layer: approximately 1.5mm

Sofwave primarily targets the middle dermis layer, about 1.5mm beneath the skin surface.

This area contains Collagen and elastic fibers that are related to skin firmness, elasticity, and the formation of fine lines.

By delivering targeted thermal stimulation, Sofwave can help reduce certain facial fine lines and skin laxity.

3. Equipped with an epidermal cooling protection system

Equipped with Sofwave Sofcool™ Epidermal Cooling TechnologyIt helps protect the skin surface during ultrasonic energy delivery, reducing the risk of the epidermis being affected by heat.

The cooling system also helps to Lifting the comfort level during the treatment, but actual pain perception can still vary depending on individual sensitivity, the treatment area, and energy settings.

Who is Sofwave suitable for?

Sofwave can serve as an assessment option for those with the following skin concerns:

1. People with less facial fat or thinner skin

For those with thinner faces who are concerned that deep ultrasound treatments might affect facial fat, they can discuss with their doctor whether Sofwave, which targets the dermal layer primarily, would be suitable for them.

But this doesn’t mean Sofwave eliminates all risk of fat or tissue heating—evaluation by a doctor is still necessary.

2. Those looking to reduce fine lines around the eyes, corners of the mouth, and neck

As Collagen levels decline, fine lines may gradually appear around the eyes, mouth, and neck.

Sofwave can target the appropriate areas after evaluation to help reduce certain wrinkles and skin sagging.

3. Those who have undergone HIFU and are worried about sunken cheeks

Some consumers may worry about facial fat loss or sagging after undergoing HIFU treatment.

Since Sofwave is primarily designed for the shallower dermal layers, it’s a good idea to discuss with your doctor whether it meets your specific treatment needs.

If noticeable cheek hollowing has already appeared, it’s still important to identify the underlying cause first rather than simply opting for another ultrasound device.

4. Those looking to improve skin laxity and overall skin quality

For those looking to Lifting skin firmness, reduce fine lines, and improve skin elasticity, Sofwave can serve as one of the non-surgical treatment options.

If the main concerns are enlarged Pores, acne scars, or noticeable uneven skin texture, it may be necessary to consider other more targeted treatment options.

MILAC.C’s Sofwave Personalized Treatment Assessment

Everyone’s skin thickness, fat distribution, degree of sagging, and aging issues vary, which is why not all people are suitable for the same HIFU treatment method.

At MILAC.C Clinic in Seoul, South Korea, we place great emphasis on a thorough doctor’s assessment before starting any treatment. Based on each individual’s skin condition and desired outcomes, we discuss the most suitable treatment methods and energy settings.

Whether you’re looking to reduce fine lines around the eyes and boost facial firmness, or concerned about potential facial sagging associated with traditional HIFU treatments, it’s recommended to consult a doctor first to determine if Sofwave is right for you.

The key to choosing a treatment regimen isn’t simply pursuing higher energy levels or deeper penetration, but finding a treatment method that suits your skin’s specific needs.

What is Thermage FLX from South Korea’s Phoenix Wave? An overview of its working principle, probes, authenticity verification, and MILAC.C customized treatment programs

Wanting to get a Phoenix Radio treatment in South Korea, but not sure what makes Thermage FLX different from other lifting treatments?

Thermage FLX (Korean: 써마지 FLX) is one of the popular non-invasive radiofrequency skin tightening treatments in South Korea. It uses monopolar RF to deliver heat energy into the skin tissue, and through thermal effects combined with subsequent Collagen remodeling, it helps improve wrinkles and enhance skin firmness.

However, not everyone needs the same number of sessions or level of energy for Phoenix Radio waves. Factors such as skin thickness, degree of sagging, facial fat distribution, and the treatment area all influence the doctor’s assessment and treatment plan.

Located near Yuseong Station in Seoul, South Korea MILAC.C Clinic(밀락씨의원)A 1:1 consultation and assessment is conducted by Director Park Ji-young to develop a personalized treatment plan based on individual skin conditions.

Thermage FLX is a non-invasive skin treatment device that uses monopolar radiofrequency technology, often referred to as “Phoenix Waves.”

The treatment uses radiofrequency energy to heat the skin tissue, triggering a thermal response in the Collagen, which is then gradually reshaped during the subsequent tissue repair process.

Its main applications include:

  • Reduce facial fine lines and wrinkles
  • Helps Lifting skin firmness
  • Reduce fine lines around the eyes
  • Assessing non-surgical treatments for skin sagging

It’s important to note that the degree of improvement from Phoenix Radio waves varies depending on individual skin conditions. It cannot replace all types of lifting surgeries, nor is it suitable for addressing all cases of facial sagging solely through radio wave therapy.

1. Monopolar RF energy and Collagen remodeling

Thermage FLX uses monopolar radiofrequency to generate heat that acts on skin tissue, helping to reduce wrinkles and improve skin firmness.

Some people may notice initial firming effects after the treatment, while further improvements will gradually appear as the Collagen is reshaped.

However, the time it takes for results to appear, the degree of improvement, and how long they last are all influenced by factors such as age, skin type, lifestyle habits, and individual tissue responses.

2. AccuREP’s real-time energy adjustment technology

Equipped with AccuREP technology, Thermage FLX adjusts energy delivery based on feedback from each RF pulse.

This design helps to Lifting the consistency of energy output.

However, equipment technology cannot replace a doctor’s judgment. Skin thickness and tolerance vary from one area to another, so doctors still need to adjust the treatment parameters based on the actual conditions.

3. Cooling and Vibration System

Thermage FLX combines cooling and vibration technology to protect the skin’s surface and enhance comfort during treatment.

A feeling of heat, stinging, or discomfort may still occur during the procedure, with individual experiences varying.

MILAC.C conducts assessments based on the patient’s pain response, skin condition, and treatment area, rather than aiming solely to increase energy levels during treatment.

Thermage FLX comes with specialized probes designed for different treatment areas — the same probe is not used for the face and eye contour.

Facial Probe (Total Tip)

  • Probe area: 4.0 cm²
  • Common specifications: 300, 600, 900 REP
  • Primary applications: reducing facial wrinkles and improving skin firmness

The facial probe is suitable for broader treatment plans. The actual treatment area, number of sessions, and energy level still need to be determined by a physician.

Eye Tip

  • Probe area: 0.25 cm²
  • Common specifications: 225, 450 REP
  • Primary applications: Treatment of wrinkles around the eyes and eyelids

The skin around the eyes is relatively thin and delicate, so a specialized probe designed for this area is required, along with an assessment of the procedure by a doctor with relevant experience.

With Phoenix Radio, more broadcasts don’t necessarily mean better quality. The appropriate treatment plan should be chosen based on the scope of treatment, skin condition, and the doctor’s assessment.

When choosing a clinic in South Korea like Phoenix Radio Wave Clinic, in addition to price and treatment volume, it’s also important to verify the origin of the equipment, the authenticity of the probes, and the transparency of the treatment process.

MILAC.C places great emphasis on using original Thermage FLX devices and genuine probes, and explains the authenticity verification process and treatment procedures in its clinic introductions.

Before starting the treatment, it’s recommended to check with the clinic:

  1. Is the Thermage FLX device being used?
  2. Is the treatment probe an authentic original product for that specific area?
  3. Plan the number of sessions and treatment area.
  4. Can you provide the corresponding genuine product certification documents?
  5. Which doctor will conduct the evaluation and procedure?

Genuine equipment is a crucial part of ensuring safe treatment outcomes, but it doesn’t mean side effects are completely eliminated. Proper operation, appropriate indication assessment, and post-operative care are equally important.

1. One-on-one consultation with Director Park Ji-young

Everyone’s facial structure, skin thickness, and degree of sagging vary.

At MILAC.C, Director Park Ji-young first listens to the patient’s concerns, examines the skin and facial contours, before determining whether Thermage FLX is the right treatment.

It’s not applied to all patients using a fixed dosage or uniform method.

2. Customize energy settings based on different treatment areas

The implementation plan for Phoenix Radio waves depends not only on the transmission power.

MILAC.C evaluates energy distribution and the areas that need extra focus based on the treatment area, skin condition, and individual needs.

For those with less facial fat, already noticeable hollows, or special skin conditions, it’s even more important to carefully assess whether the treatment is suitable.

3. Prioritize comfort and safe application

There may be a feeling of heat or discomfort during the Phoenix Radio treatment—it’s not a completely pain-free procedure.

MILAC.C places great emphasis on real-time feedback during the treatment process, and adjusts the appropriate parameters based on individual conditions.

4. Authentic Product Certification and Treatment Transparency

MILAC.C places a strong emphasis on using genuine equipment, original probes, and ensuring transparency regarding treatment information, so that patients can understand the devices being used, the treatment plan, and any important precautions before undergoing the procedure.

Thermage FLX may be suitable for those looking to improve certain facial wrinkles and skin laxity without surgery.

For example:

  • Starting to worry about fine lines and wrinkles on the face
  • It feels like the skin’s firmness has declined.
  • Looking to learn about non-surgical skin tightening treatments
  • I have fine lines around my eyes and would like a doctor to assess the best ways to improve them.

However, if the main issue is noticeable fat loss, sagging of deeper tissues, or changes in contours caused by bone structure, Phoenix Radio Waves may not be the best choice.

Whether it is suitable for treatment should be assessed by a doctor based on individual conditions.

Phoenix Wave is a non-invasive treatment, but it may still cause brief redness, swelling, pain, or localized discomfort.

In rare cases, burns, blisters, discoloration, sunken contours, or other tissue damage may also occur.

The actual risks are related to individual skin conditions, equipment operation, and treatment parameters.

Before starting the treatment, be sure to inform your doctor about your medical history, any implanted electronic medical devices, your skin condition, and other cosmetic treatments you’ve undergone recently.

Common Questions FAQ about South Korea’s Phoenix Radio

No. Thermage FLX uses monopolar RF technology, whereas HIFU treatments typically employ focused ultrasound technology. The energy sources and treatment methods differ between the two, so the choice should be based on individual concerns.

Some patients may notice changes after just one treatment session, but the extent of improvement and when it occurs vary from person to person. Not everyone will achieve the same results.

Not everyone will experience facial hollowing, but energy-based treatments still carry associated risks. Those with naturally less facial fat or existing cheek hollows particularly need a careful assessment.

300 shots and 600 shots represent different specifications for the number of RF applications, but it doesn’t mean that the results from 600 shots will necessarily be twice those of 300 shots. The choice should depend on the treatment area, individual skin conditions, and the doctor’s recommendations.

Thermage FLX comes equipped with a specialized eye probe that can be used to treat wrinkles around the eyes and eyelids in suitable cases. However, baggy eyes, Tear trough correction, pigmented Dark circle treatment, and fine lines around the eyes are distinct issues that require individual assessment.

It’s recommended to verify whether the equipment and probes are genuine, who will be performing the procedure, the number of sessions, the treatment area, the total cost, potential risks, and whether clear explanations in an understandable language are provided.

MILAC.C Clinic (밀락씨의원) is located near Yuseo Station in Seoul, South Korea, offering consultations for Thermage FLX, the Phoenix radio wave therapy, and other skin tightening treatments.

The clinic offers one-on-one consultations led by Director Park Ji-young, who focuses on tailoring treatment plans to each individual’s facial features. Chinese translation services are also available to assist clients.

If you’re considering getting a Phoenix radio wave treatment in South Korea, feel free to contact MILAC.C in advance to learn about the suitable treatment options, costs, and scheduling process.

Clinic Name: MILAC.C Clinic(밀락씨의원)
Location: Seoul, South Korea|Near Exit 3 of Yuseo Station
Director: Dr. Park Ji-young, Representative Director
Consultation language: Assistance with Chinese/English/Japanese translation

This article provides general medical information and should not replace a physician’s personalized diagnosis. Treatment suitability, outcomes, risks, and recovery times vary from person to person.

References: